Deformation Mechanisms in Ni-Based Superalloys at Room and Elevated Temperatures Studied by in Situ Neutron Diffraction and Electron Microscopy

Polycrystalline Ni-based superalloys are one of the most frequently used materials for high temperature load-bearing applications due to their superior mechanical strength and chemical resistance. In this paper, we presented an in situ diffraction study on the tensile deformation behavior of the polycrystalline Ni-based superalloy VDM® Alloy 780 at temperatures up to 500 °C performed at the STRESS-SPEC neutron diffractometer at the Heinz Maier-Leibnitz Zentrum. A detailed microstructural investigation was carried out by electron microscopy before and after testing. The results of these studies allowed us to determine the deformation mechanism in the differently orientated grains. It is shown that the deformation behavior, which is mainly dislocation motion and shearing of the γ′-precipitates, does not change at this temperature range. The deformation is strongly anisotropic and depends on the grain orientation. The macroscopic hardening can mainly be attributed to plastic deformation in grains, where the (200) lattice planes were orientated perpendicular to the loading direction. Accordingly, a remaining lattice strain and high dislocation density were detected predominantly in these grains.