Direct Contact Plating - Inline Plating Solution For Zebra Ibc By Local Contacting
PROCEEDINGS OF THE 8TH WORKSHOP ON METALLIZATION AND INTERCONNECTION FOR CRYSTALLINE SILICON SOLAR CELLS(2019)
摘要
An inline plating solution, in which electrolyte and contact system are arranged on the same side, is presented in this work. This concept allows plating onto cell concepts that do not have existing seed metallization on a significant share of surface area, e.g. ZEBRA IBC solar cell. Local contacting of Si or local metal structures is required to enable plating on these cell concepts. A new contacting scheme, which includes a stainless steel brush, was adapted into the existing inline plating tool of the company RENA Technologies GmbH. It allows local contacting of Si and of metal structures without any temporary masking. First results of a plated contact grid on a ZEBRA IBC solar cell are successfully demonstrated. One result presents the simultaneous plating of n-type BSF and p-type emitter with finger heights of 18 mu m +/- 2 mu m and of 10 mu m +/- 1 mu m, respectively. In addition, important process development steps such as alignment are shown. An edge inhomogeneity and simultaneous plating on both polarities could be solved by introducing an electroless Ni seed. Furthermore, a plating voltage limitation proved also to be beneficial for plating homogeneity. Adaptations in the inline plating tool were also made.
更多查看译文
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要