Effect Of Temperature On The Pilot-Scale Catalytic Pyrolysis Of Loblolly Pine

A pilot-scale biomass catalytic pyrolysis unit with a nominal throughput of one tonne of biomass per day (1TPD) has been in operation since 2013 to investigate the process parameters that have the largest influence on biocrude yield, oxygen content, and chemical composition. A parametric study was conducted to investigate the effect of pyrolysis temperature, ranging from 433 to 581 degrees C, on biocrude yield and quality. A locally sourced loblolly pine feedstock and a commercially available, spray dried, nonzeolitic gamma-Al2O3 catalyst were used in individual experiments conducted at each pyrolysis temperature to achieve a minimum of 4 h of steady-state continuous operation. Typically, 600-800 kg of biomass was fed over a 12-h period, with one experiment extended to almost 29 h (1144-kg biomass fed) and one experiment interrupted by a process upset after just 7 h (411-kg biomass fed). Comprehensive analysis of collected gas, liquid, and solid products were used to calculate carbon balances (77% to 107%) for each experiment. The biocrude yield ranged from 12 to 18 wt % C and, in general, decreased with increasing pyrolysis temperature. The average steady-state biocrude yield as a function of temperature translated to a biocrude production rate between 40 and 50 gallons per dry ton. The biocrude oxygen content varied between 21 and 31 wt %, on a dry basis, and as expected, decreased with increasing pyrolysis temperature. The identified components in the semivolatile biocrude products are mostly methoxyphenols and other multiphenolic compounds. The multiphenolic compounds are demethoxylated at pyrolysis temperatures above 500 degrees C, producing biocrudes with higher concentrations of monophenols and polycyclic aromatic hydrocarbons. The concentration of anhydrosugars, like levoglucosan in the biocrudes, decreased with increasing pyrolysis temperature from similar to 15 to similar to 1 vol %.