How do the finite-size particles modify the drag in Taylor-Couette turbulent flow

We experimentally investigate the drag modification by neutrally buoyant finite-size particles with various aspect ratios in a Taylor-Couette (TC) turbulent flow. The current Reynolds number, Re, ranges from 6.5 x 10(3) to 2.6 x 10(4), and the particle volume fraction, Phi, is up to 10%. Particles with three kinds of aspect ratio, lambda, are used: lambda = 1/3 (oblate), lambda = 1 (spherical) and lambda = 3 (prolate). Unlike the case of bubbly TC flow (van Gils et al., J. Fluid Mech., vol. 722, 2013, pp. 317-347; Verschoof et al., Phys. Rev. Lett., vol. 117, issue 10, 2016, p. 104502), we find that the suspended finite-size particles increase the drag of the TC system regardless of their aspect ratios. The overall drag of the system increases with increasing Re, which is consistent with the literature. In addition, the normalized friction coefficient, c(f,Phi)/c(f,Phi)=0, decreases with increasing Re, the reason could be that in the current low volume fractions the turbulent stress becomes dominant at higher Re. The particle distributions along the radial direction of the system are obtained by performing optical measurements at Phi = 0.5% and Phi = 2%. As Re increases, the particles distribute more evenly in the entire system, which results from both the greater turbulence intensity and the more pronounced finite-size effects of the particles at higher Re. Moreover, it is found that the variation of the particle aspect ratios leads to different particle collective effects. The suspended spherical particles, which tend to cluster near the walls and form a particle layer, significantly affect the boundary layer and result in maximum drag modification. The minimal drag modification is found in the oblate case, where the particles preferentially cluster in the bulk region, and, thus, the particle layer is absent. Based on the optical measurement results, it can be concluded that, in the low volume fraction ranges (Phi = 0.5% and Phi = 2% here), the larger drag modification is connected to the near-wall particle clustering. The present findings suggest that the particle shape plays a significant role in drag modification, and the collective behaviours of rigid particles provide clues to understand the bubbly drag reduction.