Comparison of Foaming Properties Between the Shirasu Porous Glass Membrane Device and Tessari's Three-way Stopcock Technique for Polidocanol and Ethanolamine Oleate Foam Production: A Benchtop Study.

PURPOSE:To compare the characteristics of polidocanol (POL) and ethanolamine oleate (EO) sclerosing foams produced by a Shirasu porous glass membrane (SPGM) device with those made using a 3-way stopcock (3WSC). MATERIALS AND METHODS:Foam half-life times were measured in an ex-vivo benchtop study. Computed tomography (CT) images of each foam were obtained over the time course, and a CT texture analysis was conducted. The bubble size in each foam was measured by an optical microscope. RESULTS:Median foam half-life times were longer in the SPGM group than in the 3WSC group (POL: 198 vs 166 s, P = .02; EO: 640 vs 391 s, P < .01). In the CT texture analysis, median standard deviation (SD) and entropy (randomness) were lower, and median energy (uniformity) and gray-level cooccurrence matrix (GLCM) homogeneity were higher in the SPGM group than in the 3WSC group (POL SD: at 30 s and 50-300 s; POL entropy: at 0-60 s; EO SD: at 0-600 s; EO entropy: at 0-460 s; POL energy: at 0-40 s; POL GLCM homogeneity: at 0-250 s; EO energy: at 0-360 s; EO GLCM homogeneity: at 0-480 s; all P < .05). Median bubble diameters in the SPGM group and in the 3WSC group were 69 and 83 μm (P < .01), respectively, in the POL foam; and 36 and 36 μm (P = .45), respectively, in the EO foam. CONCLUSIONS:POL and EO foams had greater uniformity and longer foam half-life time when prepared with an SPGM device than with a 3WSC.