The Design and Implementation of Remote Desktop Using Thin Client

The aim of the study was to facilitate the handling of built computer networks, reduce the cost for client purchases, saving resources. Then tested to measure QOS parameter that is delay, packet loss and throughput. Server is a service provider on a computer network. A computer network can be created by requiring clients and other devices. Usually, the cost to build a computer network is quite expensive. Therefore, built a computer network using the server with EXSi operating system that aims to store a virtual client that will be accessed by clients. While the client using HP T5720 hardware, raspberry pi 3, and laptop that aims to save in terms of cost, and resources compared to the PC as usual. Therefore designed a system with remote desktop using thin client, which In addition, testing is also done to measure CPU performance and server RAM. QOS testing is obtained from the number of clients connected to each other, with delay> 150 ms and packet loss 0%, then the delay and packet loss included into the network category is very good. Based on the tests performed to analyze CPU server performance with 4GB RAM, the number of virtual clients can be operated ± 4 virtual clients. Every client in this system consumes less power than 24V less than power for a Personal Computer.