Study on shear behavior and damage constitutive model of tendon-grout interface

Ground anchors are responsible for maintaining the stability and integrity as well as controlling the deformation, displacement, and crack development in the surrounding ground. Tendon-grout (T-G) interface, which is the weak part of anchorage structures, affects the anchorage performance of the ground anchor during load-transfer processes. To investigate the shear mechanical properties of the tendon-grout interface, a series of pull-out tests were conducted on anchorage element under constant radial stiffness boundary conditions. Moreover, the equivalent calculation for the constant radial stiffness boundary condition was analyzed. The mechanical per-formance of cement grouts cured for different periods was investigated, including the compressive strength and shear strength. Additionally, the failure modes of tendon-grout systems and effects of different tendon quantity, spacing and offset, were assessed. The failure evolution mechanism of the interface during the pull-out process was clarified. In addition, the microscopic structural characteristics of the tendon-grout interface were investi-gated. Two interfacial shear stress-displacement relationships were developed based on the interface failure modes, i.e., stress attenuation type and ideal elasto-plastic type. According to the test results, the peak strength of the interface increased with the tendon spacing, while the residual strength decreased. The effect of the tendon offset on the shear stiffness and strength of the interface is significant. A damage constitutive model was pro-posed to model the shear behavior of the tendon-grout interface. The proposed model verified by comparing with the test results and further adopted in pull-out test simulation. The conclusions will provide a better under-standing on the shear behaviors of tendon-grout interface, and facilitate the development of a general evaluation method for ground anchor systems.