Realization of inversely designed metagrating for highly efficient large angle beam deflection

Directional emission source is one of the key components for multiple-view three-dimensional display. It is hard to achieve high efficiency and large deflection angle direction sources via geometric optics due to the weak confinement of light. The metasurface especially metagrating provides a promising method to control light effectively. However, the conventional forward design methods for metasurface are inherently limited by insufficient control of Bloch modes, which causes a significant efficiency drop at a large deflection angle. Here, we obtained high efficiency large deflection angle metagratings by realizing the constructive interferences among the propagation Bloch modes and enhancing the outcoupling effect at the desired diffraction order. The grating structures that support the coupling of Bloch modes were designed by an inverse design method for different incident wavelengths, and the total phase response of a supercell can be tailored. For a red (620 nm) incident light, the theoretical deflection efficiency of a silicon metagrating can be higher than 80% from 30 degrees to 80 degrees. The experimental deflection efficiency can achieve 86.43% for a 75 degrees deflection metagrating. The matched simulation and experimental results strongly support the reliability of developed algorithm. Our inverse design approach could be extended to the green (530 nm) and blue (460 nm) incident light with titanium dioxide metagratings, with theoretical deflection efficiency of over 80% in a large deflection angle range of 30 degrees to 80 degrees. Considering the multiple visible wavelength deflection capability, the developed algorithm can be potentially applied for full color three-dimensional display, and other functional metagrating devices based on different dielectric materials. (C) 2022 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement