Production of Belite Based Clinker from Ornamental Stone Processing Sludge and Calcium Carbonate Sludge with Lower CO2 Emissions

Environmental concerns have come to the forefront due to the substantial role of the cement industry in the extraction and expenditure of natural resources. Additionally, industrial processes generate a considerable amount of waste, which is frequently disposed of inadequately. The objective of this study was to evaluate the simultaneous use of ornamental rock processing sludge and calcium carbonate sludge generated from the kraft process in the production of belitic clinker. These waste materials would be used in total or partial substitution of natural raw materials, namely, limestone and clay. Several formulations were produced and sintered at 1100 and 1200 degrees C. The raw materials were characterized physico-chemically and thermogravimetrically, with subsequent evaluation of the resulting dosed raw mixes. Mineral analyses determined that the mixtures with limestone and clay in substitution ratios of 95% and 100%, respectively, and sintered at 1100 degrees C have the potential to produce belite-rich clinkers. This temperature is considerably lower than those reported in reference studies. Additionally, full limestone and clay substitution could result in a 23.92% reduction in carbon dioxide in clinker production. The results confirmed the potential use of ornamental rock processing sludge and calcium carbonate sludge as viable alternative materials for cement production and, consequently, could contribute to a reduction in the negative environmental impacts of this industry.