A new numerical simulation method of hydrogen and carbon compounds in shale reservoir

Hydrogen energy can be produced by the decomposition of hydrogen and carbon compounds. A numerical analysis method of accuracy and efficiency provides important reference value for optimizing development plans and predicting production performance of hydrogen and carbon compounds. In this work, embedded discrete fracture model (EDFM) is used to study the production performance of hydrogen and carbon compounds under non-liner seepage under the threshold pressure gradient and complex fracture systems consist of the hydraulic fractures, secondary fractures, natural fractures. A dual-permeability model of the same case is also constructed as a comparison study to analyze the development of hydrogen and carbon compounds. On this basis, the influence of threshold pressure gradient on production of hydrogen and carbon compounds is quantitatively evaluated in this paper to modify the numerical model and a novel method for the simulation of fractured hydrogen and carbon compounds reservoirs is provided. Through model comparison, the impact of fractures in the reservoir on production can reach 289.1%. A dual-permeability model of the same case is also constructed as a comparison study to analyze the development of the reservoir and the result shows a 7.9% distinction on the cumulative production. It is analyzed that when the threshold pressure gradient is increased from 0.1 MPa/m to 0.6 MPa/m, the output decline of different models ranges from 6% to 15% and a novel method improving model fidelity for the simulation of fracture reservoirs is provided. • A new numerical simulator was presented to study production performance in shale reservoirs. • Both embedded discrete fractures and the threshold pressure gradient were considered into model. • The method provides a new idea and reference for future horizontal well fracturing model.