Alginate/gelatin-based Hybrid Hydrogels with Function of Injecting and Encapsulating Cells in Situ.

Multi-network hydrogels with high strength and toughness have attracted increasing attention. Herein, a hybrid hydrogel consisting of alginate, gelatin, and polyacrylamide was constructed with the combination of advantages of natural and synthetic polymers. Alginate grafted with host-guest complex of beta CD/Ad-AAm was first prepared, namely Alg-beta CD/Ad-AAm, then further crosslink with gelatin methacryloyl (GelMA) to form hydrogel via onestep UV light initiation. The hydrogel produced by this method has more uniform and well-crosslinked networks. The hydrogels demonstrated uniform porosity, adjustable hydrophilicity (water contact angle within 32.7-91.5 degrees), and desired mechanical properties (maximum tensile strain of 242.8%, tensile strength of 75.9 kPa, and Young's modulus of 28.5 kPa). The hydrogel also possessed self-healing ability and pH sensitivity, showing higher mechanical tensile strength at lower pH. The temperature-adjustable viscosity of pre-gel solution (sol-gel transition point of 20.4 degrees C) endowed it to be 3D printed as a bioink, and the printed scaffold exhibited good resilience and toughness. Moreover, HUVEC, L929, and 3T3 cells were cultured on hydrogel surfaces for 28 days and were enveloped within the hydrogels for 3D culture, indicating excellent cytocompatibility of the hydrogels. Therefore, this hybrid hydrogel system can be used potentially in cell culture scaffold and tissue engineering.