Self-supporting and dual-active 3D Co-S nanosheets constructed by ligand replacement reaction from MOF for rechargeable Al battery

Metal sulfides with high theoretical capacities are expected as promising cathode materials of Al batteries (AIBs). However, powdery active materials are mainly synthesized and loaded on current collector by insulating binder without capacity. Meanwhile, S as inert element in metal sulfides can not usually pro-vide capacity. So, powdery metal sulfides only exhibit limiting practical capacity and poor cycling stability due to weak conductivity and low mass utilization. Herein, the novel self-supporting and dual-active Co-S nanosheets on carbon cloth (i.e. Co-S/CC) with hierarchically porous structure are constructed as cathode of AIBs. Co-S nanosheets are derived from ZIF-67 nanosheets on CC by a facile ligand replacement reaction. As a result, the binder-free Co-S/CC cathode with good conductivity delivers excellent initial dis -charge capacity of 383.4 mAh g(-1) (0.211 mAh cm(-2)) at current density of 200 mA g(-1) and maintain reversible capacity of 156.9 mAh g(-1) (0.086 mAh cm(-2)) with Coulombic efficiency of 95.8% after 500 cycles, which are much higher than those of the traditional slurry-coating cathodes. Both Co and S as active elements in Co-S/CC contribute to capacity, which leads to a high mass utilization. This work provides a significant strategy for the construction of self-supporting metallic cathode for advanced high-energy density Al battery. (C) 2021 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences Published by Elsevier B.V. All rights reserved.