Key Structure Design and Experiment of Air-Suction Vegetable Seed-Metering Device

The air-suction precision seed-metering device is prone to the instability of the seed adsorption state, which arises from blockage of the suction hole and leads to uneven seeding. This paper analyzed and determined key structural parameters of the seed-metering plate, then established an adsorption mechanics model of the seed during the migration process and designed the key structure of the air-suction seed-metering device with the aim of improving the uniformity of high-speed direct seeding of vegetables. Furthermore, we used the DEM-CFD coupling method to analyze the influence of the law of seeds on the change of the flow field with different hole types. Results showed that the turbulent kinetic energy (202.65 m(2).s(-2)) and the coupling force to the seeds (0.029 N) of the B-type hole are the largest, which is the best fluid domain structure for the suction hole of the seed-metering plate. Moreover, we used Adams to analyze the meshing process between the knock-out wheel and the seed-metering plate, affirming the rationality of the knock-out wheel design. Finally, in order to improve the working efficiency of the seed-metering device, we performed one-factor and response surface experiments of seeding performance using the air-suction seed-metering device designed with the optimized structure as the experimental object. Analysis of the influence of weights across each factor on the experimental performance evaluation indicators revealed an optimal combination of seeding performance parameters in the air-suction seed-metering device, namely a seed-throwing angle of 13 degrees, a working speed of 14.5 km/h, and negative pressure of 3.1 kPa. Results from verification experiments revealed the corresponding experimental indicators, namely qualified, multiple, and missing indexes of 95.9, 1.2%, and 2.9%, respectively.