Research on the Mathematical Modelling of the Starting Torque of Self-Lubricating Spherical Plain Bearings

The starting torque of self-lubricating spherical plain bearings (SSPBs) is a key parameter for evaluating the performance of bearings. Therefore, the starting torque of SSPBs should be controlled to within an allowable range. In this paper, the starting torque generation mechanism is analyzed, and the critical load for the separation of the liner from the outer spherical surface of the inner ring is determined. A mathematical model of the starting torque is established; the experimental and theoretical results of the starting torque are compared and analyzed, and then the accuracy of the mathematical model is evaluated by the deterministic coefficient R2. The research reveals that a critical load exists for the starting torque. Below the critical load, the starting torque is dependent on the outer spherical radius of the inner ring, bearing wrap angle, and liner parameters such as the compressive elastic modulus, friction coefficient, and precompression of the liner; however, the starting torque is independent of the radial load. Above the critical load, the starting torque is also dependent on the radial load. The research results provide a theoretical basis for the design and application of bearings.