Loss of energetic particles due to resistive wall mode instability in ITER

Effects of an unstable n = 1 (n is the toroidal mode number) resistive wall mode (RWM) on the energetic particle (EP) confinement and loss are numerically investigated, for an ITER steady state scenario with 10 MA plasma current and 5.3 T toroidal field. The eigenfunction of the RWM is computed, with the associated three-dimensional magnetic field perturbation superposed with the 2D equilibrium field for tracing the EP drift orbits. Considered are mono-energetic EPs at 0.5 MeV and 1 MeV for deuterium ions, and 3.5 MeV for fusion-born alphas, with a range of distribution in the particle pitch angle. Modeling finds that less than 20% of EPs can be lost to the limiting surface in ITER assuming a source distribution uniform in minor radius, due to an unstable RWM that produces 100 Gauss poloidal field perturbation at the outboard mid-plane just inside the (effective) resistive wall surface. On top of the initial prompt drift orbit loss for counter-current EPs, the RWM induced particle loss occurs on a one second time scale, which is comparable to the RWM growth time in ITER. The 'wetted' area, due to the lost EPs striking the limiting surface, is generally found to be large due to the RWM. This is a favorable prediction for ITER. The loss distribution in the poloidal angle is more uniform for co-current EPs. Counter-current EPs experience outward orbit drift when launched from the low-field side, and tend to more often hit the bottom region of the limiting surface.