Selective vapor sensors with thin-film MoS₂-coated optical fibers

Effective chemical sensor devices must facilitate both the detection of analytes at ultralow concentrations and the ability to distinguish one analyte from another. Sensors built using two-dimensional nanomaterials have demonstrated record-level sensitivity toward certain chemical vapor species, but the specificity of chemical analyte detection remains lacking. To address this deficiency, this work pioneers the use of a broadband fiber-optic sensor coated with thin-film MoS2 where selectivity is achieved through observing changes in the visible spectrum transmission during exposure to different aliphatic and aromatic vapors. A significant loss in transmission across the fiber was observed near peaks in the refractive index associated with the C, B, and A excitons as well as at peaks associated with defect states. Several mechanisms for achieving selectivity are investigated, including deciphering donor/acceptor molecules, aromatic compounds, analytes with high refractive index, and intercalants such as aniline-based compounds. Moreover, the sensor device is entirely reusable and demonstrates reversible, empirical, and selective detection of aniline down to 6 ppm.