Effect on CBR Values with Addition of Coir Geotextile and Marble Dust in Silty Sands

IOP Conference Series: Earth and Environmental Science(2021)

引用 0|浏览0
暂无评分
摘要
Abstract The subgrade is the foundation of pavement. The conventional method of replacing weak soil with good soil can cause an increase in the cost of a project. Due to this reason ground improvement techniques are much popular nowadays. The major goal of this research work is to compare California Bearing Ratio (CBR) values of the virgin soil and soil reinforced with coir geotextile in one layer and a combination of two layers at different heights from the top surface of the soil. To see the change in CBR values one layer of coir geotextile was reinforced at three different heights (i.e., H/3; H/2 and 2H/3). After that, the effect on CBR values by reinforcement of combination of two layers of coir geotextile at different heights (i.e., H/3 and H/2; H/2 and 2H/3; and H/3 and 2H/3) from the top surface of the soil was studied. Thereafter, the soil is replaced by various percentages of marble dust ranging from 10% to 25% with an increment of 5% and again CBR values of soil samples reinforced with one layer of coir geotextile and a combination of two layers of geotextile at three different heights were compared with virgin soil. The test results reviewed that the maximum dry density (MDD) decreased and optimum moisture content (OMC) increased with the replacement of marble dust in the soil. The CBR test results specify an enhancement of the value of CBR with the addition of coir geotextile and marble dust. The maximum value of CBR is obtained when one layer of coir geotextile was introduced at the height of H/3 and in the case of a combination of two layers of coir geotextile maximum CBR values is obtained when the coir geotextile was introduced at a height of H/3 and 2H/3 from the top surface of the soil.
更多
查看译文
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要