Characterization and electrochemical corrosion analysis of heat-treated reinforced ha coatings deposited by vacuum plasma spray technique

Herein, a biomimetic coating of hydroxyapatite (HA)–Al2O3 and HA–ZrO2 was deposited on Ti–6Al–4V-alloy using vacuum plasma spray (VPS) technique. The bond-coat of ZrO2 has been introduced between the substrate and reinforced HA coatings to study the effect of bond-coat on structural, mechanical properties and electrochemical corrosion performance of the developed coatings. In addition, the impact of thermal treatment of coating was investigated on these properties too. Coating characteristics, such as morphology, porosity, surface roughness, and crystallinity were investigated. The corrosion performance of coatings was tested in Hank’s-based salt solution (HBSS). Significant enhancement in crystallinity and surface-hardness has been witnessed after heat treatment; nevertheless, porosity reduced. The electrochemical corrosion study revealed that the corrosion resistance of heat-treated samples was better than the as-sprayed coatings samples. The intensity of XRD peaks of all coatings increased after 24[Formula: see text]h immersion in HBSS for the electrochemical test in comparison to the intensity of peaks before the corrosion test.