Photoactive Materials for Decomposition of Organic Matter Prior to Water Analysis-A Review Containing Original Research

Water plays a fundamental role in meeting the basic needs of society. Surface waters contain numerous organic pollutants, such as pesticides, drugs, and surfactants. The use of photolysis processes in organic matter degradation not only has practical applications in wastewater treatment but is also of major importance in the pretreatment of samples prior to the trace analysis of numerous analytes. The heterogeneous degradation is simple to implement prior to ultra-traces determination and is the only one allowed before the speciation analysis. Speciation analysis is currently the most important environmental challenge. The analysis of water, including tests associated with wastewater pretreatment and the monitoring of aqueous ecosystems, is the largest segment of environmental analysis. In the trace analysis of water, organic compounds are the principal interfering compounds reducing the quality of the obtained results or even preventing the determination of the examined analytes altogether. Some analytical techniques do not perform well in the presence, for example, of surfactants, so mineralization is sometimes required. Advanced oxidation processes are used to remove interfering organic compounds. The oxidation can be performed using homogenous photolysis (UV mineralization with hydrogen peroxide addition), while heterogenous photolysis using semiconductors helps to increase the removal efficiency of interferents dissolved in water. Utilizing semiconductor nanostructured materials as photocatalysts has been shown to be effective for the adequate removal of a wide spectrum of pollutants in water. Several semiconductor systems are used in the degradation of organic compounds, e.g., TiO2, Fe3O4, WO3, Fe2O3, ZnO, and mixtures of these oxides enriched with various precious metals, such as silver or gold. It is very challenging to manage the selectivity and reduction power so that organic compounds can be degraded but without disturbing the speciation of As, Cr, or Tl. Chemical modification of samples and the selection of semiconductor layers, light wavelength, and pH allow for the targeted degradation of specific compounds but may also indirectly affect the analysis of water samples. This review is a presentation of the state of the art of photocatalysis as a simple and effective technique for sample pretreatment in ultra-trace and speciation analysis and its critical as well as unpublished data related to this topic.