Strengthening the thermal Negative Poisson's ratio structures by SiC chemical vapor infiltration

Negative Poisson's ratio structures exhibit adjustable thermal expansion behavior as the thermal stress can be dispersed or offset by torsion, bending, and tension of the struts. However, the structural stability under cyclic thermal stress significantly determines the long-term durability. Strengthening the Negative Poisson's ratio structure can ensure high thermal and mechanical reliability. The work designed a heat-induced torsional Negative Poisson's ratio structures and fabricated it by 3D printing. For efficient strengthening, the preforms were further densified by chemical vapor infiltration (CVI) of SiC to enhance the reliability. Pores and gaps in the preforms were homogeneously covered and filled by the SiC, enhancing the surface finish and mechanical performance. The heat induced torsion of the structures dispersed the heat flow in one single direction, reducing the thermal stress concentration. The independent thermal expansion change of the structural unit can offset or consume the heat dissipation stress, and further improve the reliability and thermal stability through the densification process. As a result, the 120° twisted structure exhibited an average coefficient of thermal expansion (CTE) of 6. 12 × 10−6/K from room temperature (RT) to 500 °C, and the instantaneous CTE reached the minimum value of 4.01 × 10−6/K at 125 °C. Meanwhile, the load-bearing capacity strengthened significantly, exhibiting the optimized strength of 11.31 MPa and Young's Modulus of 36.44 GPa, revealing a significant improvement than those of preforms, promising for high load-bearing and low expansion application of structure-function integrated low expansion material.