Study on the Shearer Attitude Sensing Error Compensation Method Based on Strapdown Inertial Navigation System

Intelligent mining is the demand and inevitable development direction of China’s coal industry, and the shearer attitude based on the 3D spatial scale is the essential basic information for realizing intelligent mining at the fully mechanized mining face. The traditional shearer attitude monitoring technology cannot meet the accuracy requirements of attitude sensing of mining equipment at an intelligent working face. In this paper, based on the basic principle of strapdown inertial navigation system (SINS), a real-time solution algorithm for shearer attitude is constructed, and the specific process of SINS coarse alignment and fine alignment is studied. The main error terms affecting the accuracy of SINS are analyzed, and the initial alignment error, installation deviation angle error, and vibration effect error are compensated and analyzed through simulation one by one. According to the working characteristics of the shearer, the coning error and sculling error of the shearer’s SINS are compensated and analyzed through simulation. This paper provides a complete set of theories and methods for improvement of the accuracy of the shearer attitude sensing in underground operation; simulation results also verify that the theories and methods can significantly improve the perception accuracy which can provide theoretical and technical reference for the production state prediction of fully mechanized mining face and intelligent control of underground mining equipment.