Analysis of Proliferated Low Earth Orbit Constellation Resilience Against Solar Weather Radiation Effects

Proliferated low Earth orbit constellations are becoming more common both in reality and in planning. The resilience of these constellations to the radiation effects of adverse solar weather is of interest given that some of them pass over polar regions. This paper stochastically simulates solar weather events over the course of solar cycle 25 in order to quantify radiation effects on a model of Planet Lab’s Flock constellation under various design and programmatic decisions. The Flock constellation is a highly proliferated, commercial, and polar low Earth orbit earth observation architecture. Lifecycle and radiation failures are simulated along with a reconstitution system in order to quantify architectural performance as a function of constellation population. This time-based measure of performance is then used to quantify the constellation resilience and allow for programmatic and design variables to be altered in order to observe the effects on the resilience of proliferated constellations against adverse solar weather radiation effects. A sensitivity analysis is performed in order to assess which decisions most improve or degrade resilience. Broadly, the results show that commercial off the shelf components and programmatic decisions such as launch and manufacturing schedules may improve constellation resilience against adverse solar weather effects. More specifically, the results also show that commercial off the shelf components with even basic shielding levels provide high resilience to cumulative total ionizing dose effects and single event upset radiation effects. However, any further reductions to shielding would have significant impacts on single event upset rates whereas total ionizing dose would remain negligible. Furthermore, manufacturing time for Flock satellites is sufficient to maintain a resilient reconstitution strategy. Finally, results show that in order to improve the resilience afforded by a reconstitution strategy, improvements to manufacturing and launch times should be made in parallel, rather than one or the other in isolation.