Sustainable phosphorylated microcrystalline cellulose toward enhanced removal performance of methylene blue.

In this study, microcrystalline cellulose (MCC) was phosphorylated using phosphoric acid in the presence of urea and used as an adsorbent for methylene blue (MB) dye removal from an aqueous solution. The obtained products were characterized by different techniques. Batch adsorption experiments were conducted under varying conditions of incubation time, initial MB concentration, pH, and phosphorylation degree. All the samples exhibited similar and fast adsorption kinetics, described by pseudo-second-order model for MB adsorption, whereas the retention capacity depended significantly on the phosphate content and the surface charge of the adsorbents. The experimental adsorption data in the examined MB initial concentrations (0-2000 mg/L) were best suited by the Langmuir isotherm model. The study revealed that the presence of phosphates groups in the cellulose structure significantly enhanced the adsorption of the MB pollutant. The maximum dye removal capacity at pH of 7 was obtained for the phosphorylated microcrystalline cellulose (284.03 mg/g) with a high phosphorylation degree (1.92 % of P), which is 20 times higher than unmodified MCC (15.29 mg/g). This property increased from 284.03 to 328.32 mg/g when increasing the pH from 7 to 11. The MB adsorption mechanism involves hydrogen bonding, electrostatic and ion-dipole interactions. These findings are relevant to a better understanding of the role of cellulose phosphorylation in the recovery of organic dyes from the waste liquid of many industries.