Application of the solid-state fermentation process and its variations in PHA production: a review

Solid-state fermentation (SSF) is a type of fermentation process with potential to use agro-industrial by-products as a carbon source. Nonetheless, there are few studies evaluating SSF compared to submerged fermentation (SmF) to produce polyhydroxyalkanoates (PHAs). Different methodologies are available associating the two processes. In general, the studies employ a 1st step by SSF to hydrolyze the agro-industrial by-products used as a carbon source, and a 2nd step to produce PHA that can be carried out by SmF or SSF. This paper reviewed and compared the different methodologies described in the literature to assess their potential for use in PHA production. The studies evaluated showed that highest PHA yields (86.2% and 82.3%) were achieved by associating SSF and SmF by Cupriavidus necator . Meanwhile, in methodologies using only SSF, Bacillus produced the highest yields (62% and 56.8%). Since PHA (%) does not necessarily represent a higher production by biomass, the productivity parameter was also compared between studies. We observed that the highest productivity results did not necessarily represent the highest PHA (%). C. necator presented the highest PHA yields associating SSF and SmF, however, is not the most suitable microorganism for PHA production by SSF. Concomitant use of C. necator and Bacillus is suggested for future studies in SSF. Also, it discusses the lack of studies on the association of the two fermentation methodologies, and on the scaling of SSF process for PHA production. In addition to demonstrating the need for standardization of results, for comparison between different methodologies.