Experimental study of viscous fingering in sand- pack model for heavy oil reservoir

Viscous fingering phenomenon in porous media has a great impact on industrial pro-cesses, such as enhanced oil recovery processes. The previous experimental works mainly used Hele-Shaw models and micromodels to investigate viscous fingering mechanisms. However, Hele-Shaw models simulate porous media flow in a narrow gap with no pore structure. Micromodels' pore structures are simplified, and the material used to make micromodel generally has different wettability compared with real rocks. Therefore, a large-dimensions of 40 cm x 20 cmx 0.5 cm sand-pack model with a vertical well in the center is used in this study to mimic real reservoir in terms of pore structure, wettability conditions and real radial flow. To the best of our knowledge, there is no reported lit-erature on viscous fingering experimental study for radial flow in real sand-pack models. Immiscible flooding processes with high viscosity ratios ranging from 853.9 to 32080 and different injection rates ranging from 0.01 to 0.5 mlmiddotmin-1 were conducted. The viscous fingering phenomena were captured and analyzed qualitatively and quantitatively. As capillary number increases, more unstable interfaces and complicated finger structures were visually observed and validated through fractal dimension analysis. These experi-mental results are in well agreement with previously reported results obtained from Hele-Shaw models and micromodels. The dimensionless number (Ca*mu r2) analysis suggests viscosity has a greater effect on viscous fingering compared with injection rate, which was consistent with the conclusion of micromodel studies. Besides critical injection rate (0.01-0.05 ml center dot min-1), increasing the viscosity ratio to a critical viscosity ratio (2946) leads to a significant decrease of breakthrough time, which was not reported in the literature. And different from linear displacement in which the viscous fingering followings two stages, additional pseudo-stable displacement could be generated after the rapid finger genera-tion stage and combination stage for the radial displacement.(c) 2023 Institution of Chemical Engineers. Published by Elsevier Ltd. All rights reserved.