High-sensitivity NH 3 gas sensor using pristine graphene doped with CuO nanoparticles

A highly sensitive and selective NH 3 gas sensor was developed based on single-layer pristine graphene doped with copper(II) oxide (CuO) nanoparticles of a specific size. High-quality single-layer graphene was grown using chemical vapor deposition. Approximately 15 nm-sized CuO colloidal nanoparticles were fabricated by a microwave-assisted thermal method using copper acetate as the precursor, and dimethylformamide as the reducing and stabilizing agent. Pristine graphene was doped with an aqueous suspension of CuO nanoparticles at a coating speed of 1500 rpm using a simple spin coater. CuO nanoparticle doping induces changes in the electronic properties of graphene; in particular, p -type doping significantly altered graphene resistivity in the presence of NH 3 gas. Upon exposure of the pristine graphene surface to NH 3 gas, NH 3 reacted with O 2 − / O − / O 2− species on the graphene surface and released electrons into graphene. This caused a change in the concentration of charge carriers in the valence channel of graphene and an increase in graphene resistivity, facilitating real-time NH 3 monitoring with quick response and rapid recovery at 25 ℃ and ~ 55% relative humidity. Our results indicated that graphene doped with ~ 15 nm-sized CuO nanoparticles can sense NH 3 gas selectively with a resistivity response of ~ 83%. Moreover, the sensor exhibited good reusability, fast response (~ 19 s), and rapid recovery (~ 277 s) with a detection limit of 0.041 ppm and a relative standard deviation of 0.76%. Graphical Abstract