Thermal-Hydraulic Characterization and Numerical Modeling with RELAP5 Code of ATHENA Secondary Loop
NUCLEAR TECHNOLOGY(2024)
摘要
Among the envisaged experimental infrastructures supporting Advanced Lead Fast Reactor European Demonstrator (ALFRED) reactor development, the FALCON [Fostering ALfred CONstruction] consortium identified the Advanced Thermo-Hydraulics Experiment for Nuclear Application (ATHENA) as one of the facilities to address the pool of thermal-hydraulic challenges and demonstrate the feasibility of the revised ALFRED configuration, along with the thermal-hydraulic performances of its main components. ATHENA is a large pool-type lead-cooled multipurpose experimental facility featuring a large-sized vessel (3.2-m diameter and 10-m height), conceived to host almost 800 tons of lead to test ALFRED-relevant scaled components. The test section to be installed in the main vessel includes an electrically heated core simulator, made of seven fuel assemblies, which delivers to the primary coolant a nominal thermal power of 2210 kW; a main coolant pump for lead circulation; and a countercurrent shell-and-tube main heat exchanger, of which the tube bundle is fed by pressurized water by a dedicated secondary circuit. This work presents the numerical model of ATHENA along with thermal-hydraulic characterization of the facility using the system code RELAP5/Mod3.3, properly modified to include the thermophysical properties of heavy liquid metals. After the characterization of the steady state representative of the Stage 3 foreseen for the ALFRED staged approach, results of a numerical sensitivity analysis aimed at defining the most suitable procedure for the shutdown transient of the facility are presented.
更多查看译文
关键词
Lead fast reactors,ALFRED,ATHENA,heavy liquid metals,system thermal-hydraulic analysis
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要