Research on automatic detection method of secondary circuit connection of the measuring device mutual inductor

Due to the influence of the connection distance between the mutual inductor primary circuit and the metering device secondary circuit, the detection induced current of the traditional method is extremely small, which cannot accurately detect the authentic situation of the wiring, resulting in long detection time and low detection accuracy. Therefore, this paper proposes the automatic detection method of the secondary circuit connection of the metering device mutual inductor. Through the voltage sampling circuit, the secondary circuit measurement data are obtained. Using the pulse signal shaping function and the ADE7753 chip to process the secondary circuit measurement data, the secondary circuit connection fault judgment is determined. According to the judgment, the electric energy meter is used, combined with the secondary circuit measurement data, and the automatic detection of the secondary circuit connection is achieved by calculation. The experimental results show that compared with the traditional detection method, the automatic detection method of the secondary circuit connection of the metering device mutual inductor designed in this paper achieves normal and stable detection induction current. There is no inductive current with an extremely small condition, the detection accuracy is high, and the detection time is short, indicating that the method is suitable for application in actual detection projects. (c) 2023 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/). https://doi.org/10.1063/5.0133142