Stabilizing structure and voltage decay of lithium-rich cathode materials

A major challenge in the discovery of high-energy lithium-ion batteries (LIBs) is to control the voltage stability and Li+ kinetics in lithium-rich layered oxide (LrLO) cathode materials. Although these materials can provide a higher specific capacity compared to the current industrially used cathodes, the substantial voltage decay and low Li+ diffusion during long term cycling is a serious reason for hindering their practical applications. In order to suppress the voltage decay in lithium-rich cathode materials, herein we introduce the Ti doping into Li1.2Mn0.56Ni0.17Co0.07O2 cathodes. Also, the influence of Ti doping on the crystalline internal structure, surface chemistry, cycling retention, and Li+ kinetics of Li-1.2 Mn0.56Ni0.17Co0.07O2 cathodes have been focused in this work. The Ti doping effectively enhances the structural/interfacial stability of the cathode and accelerates the Li+ kinetics by expanding the lattice, thereby significantly realizing its voltage/cycling stability and high-rate capability. Experimental results show that Ti-doped LrLO (1% Ti) has achieved high electrochemical kinetics as the discharge cycle retention increased from 61.58% (pristine) to 80.0% after 180 cycles at 1 C, with 150.3 mAh g(-1) showing superior high-rate performance at 5C. Ex-situ XRD results confirmed the better structural stability of Ti-doped LrLO after high-rate electrochemical cycling. Our findings provide a suitable element doping strategy for regulating the voltage decay and cycle retention of LrLO, thus promoting their real-world application in future batteries.