Development and Validation for Quantitative Determination of Genotoxic Impurity in Gemfibrozil by Gas Chromatography with Mass Spectrometry

All regulatory organizations are paying close attention to the identification and measurement of genotoxic contaminants. Using conventional analytical techniques like high-performance liquid chromatography (HPLC) and gas chromatography to quantify probable genotoxic substances (PGIs) at the trace level is difficult (GC). Therefore, there is a necessity for advanced analytical techniques for the development of highly sensitive analytical procedures for the determination of trace-level PGIs in drug products and drug substances. This study's goal is to develop and evaluate an analytical technique for measuring allyl chloride, a possible genotoxic contaminant in gemfibrozil. For the detection of very low and trace levels of impurities, a gas chromatography with a triple quadrupole mass spectrometry detector (GC-MS/MS) approach was developed and validated. Using a column USP phase G27, a nonpolar and low bleed 5% diphenyl, 95% dimethylpolysiloxane, with dimensions of 30 m in length, 0.32 mm internal diameters, and 1.5 m film thickness, along with a flow rate of 2.0 mL/min and Helium (He) as a carrier gas, this method uses a thermal gradient elution program. The method was calibrated with a linearity range from 30% to 150% concentration with respect to the specification level and achieved a limit of detection (LOD) and limit of quantification (LOQ) were 0.005 ppm and 0.01 ppm, respectively, for allyl chloride. According to current ICH requirements, the method was validated, and it was discovered to be specific, exact, accurate, linear, sensitive, tough, robust, and stable. This method is suitable for determining allyl chloride in the regular analysis of Gemfibrozil.