Modeling and optimization of salt and boron removal in reverse osmosis system

Seawater reverse osmosis (SWRO) is a mature technology that has significantly evolved over the past few decades. However, boron removal remains a serious challenge. A new RO transport model was developed by combining the irreversible thermodynamic theory and solution-diffusion theory and considering the solute concentration polarization phenomenon. The developed RO model supplemented by the use of variable solution properties and transport parameters was validated with existing data and, it was then applied to identify the main operation parameters and assess their effect on SWRO performance, with the aim of minimizing specific energy consumption and satisfying water quality requirements. The results showed that the solution-diffusion approach, cannot capture the interaction between transported boron and water species. For high pH, applied feed pressure, and flow rate, the convective transport of boron through the seawater membrane is remarkable and its contribution to the overall boron flux can reach over 20 %. The feed operating conditions have significantly influenced the quality of the water production and the amount of energy used. The results showed that the optimal SEC increased by approximately 40 %, and the recovery ratio decreased by 11.6 % as the feed flow rate increased from 0.002 to 0.005 m3/s.