Experimental Study on the Bonding Performance of HIRA-Type Material Anchor Solids Considering Time Variation

In order to reveal the evolution of bonding performance of HIRA (High Intensity and Rapid Agent) anchor solids with maintenance time, the evolution characteristics of bond strength and stress distribution at the interface between HIRA-based anchor solids and a geotechnical body under different maintenance times and the fine damage pattern of anchor solids were studied by an indoor pull-out test of anchor solids. The comparative analysis was performed with 42.5 grade ordinary Portland cement (hereinafter referred to as P.O 42.5). The results show that the early strength and rapid setting characteristics of HIRA type material are obvious, and the difference between its average peak bond strength and that of cement is 10.45 times. The shear stress distribution has obvious stress concentration characteristics, and the peak value will appear and shift with the increase in load, and the peak shift of the HIRA anchor solid occurs earlier than that of cement. Due to different stress levels, the damage of the HIRA anchor solid after being pulled out increases with the increase in maintenance time, while that of cement gradually becomes more severe. The overall damage of the HIRA material is generally lower than that of cement in the same period.