Assessing carbon mineralization using an integrated approach at the Nesjavellir geothermal field, Iceland

<p>The Nesjavellir high-temperature geothermal field in Iceland was chosen as part of the GECO H2020 project to further demonstrate the Carbfix method of carbon mineralization. In this method, geothermal power plant emissions of CO₂ and H₂S are captured using condensed steam, and subsequently co-injected with separated geothermal water into the subsurface where they mineralize in the form of carbonate and sulfide minerals. This technology has already been successfully shown to be a safe and cost-effective approach to reduce gas emissions from the nearby Hellishei&#240;i geothermal power plant in SW Iceland.</p><p>An integration of geology, reservoir and geochemical models were used to evaluate the future injection of CO₂ and H₂S at the Nesjavellir site. These models include reservoir parameters such as the relative permeability and porosity of different stratigraphic layers as well as the locations of feedzones. Tracer tests and well temperature and pressure logs were used to calibrate single porosity and dual porosity TOUGH2 flow models. A 1-D flow reactive transport model was then created using TOUGHREACT and the parameters from the flow models and calibrated using chemical compositions of the reservoir background fluid and separated water, the proposed gas injection fluid chemistry and available bulk rock chemistry and lithological data from borehole reports. Results from this integrated approach offer possible controls on the flow, impacts of the CO₂-H₂S injection, and estimate the potential storage capacity of carbon mineralization within the Nesjavellir geothermal reservoir.</p>