Comparison of Attachment Process of Particles to Air and Oily Bubbles in Flotation

The attachment between particles and bubbles is a very important basic unit for mineral flotation. In the present study, methylation processing for glass spheres with trimethylchlorosilane was used to prepare particles with different surface hydrophobicity, and a visualization setup was assembled based on high-speed camera technology to investigate the dynamic attachment process of particles onto air/oily bub-bles. More importantly, the difference in the attachment process between particles and air/oily bubbles was successfully quantified with the software Image Pro Plus 6.0. It was found that the wetting film rup-tured at about 36 ms during the attachment between the hydrophobic glass sphere M2 and air bubbles, while it occurred at about 28 ms during the attachment between M2 and oily bubbles. Moreover, the formed three-phase contact line between hydrophobic particles and oily bubbles was larger than that between hydrophobic particles and air bubbles, suggesting a more stable attachment of the former. In contrast, no successful attachment of the hydrophilic glass sphere M0 onto air or oily bubbles was observed. These findings strongly demonstrated that oily bubbles had both strong collecting power and excellent selectivity for hydrophobic particles in flotation. This study improved the understanding of the difference between oily-bubble and conventional flotations.(c) 2023 Society of Powder Technology Japan Published by Elsevier B.V. All rights reserved.