The Efficiency of Thermite-Assisted Underwater Wet Flux-Cored Arc Welding Process: Electrical Dependence, Microstructural Changes, and Mechanical Properties

METALS(2023)

引用 2|浏览1
暂无评分
摘要
Alumino-thermic additions to the flux-cored wire can be utilized to enhance welding heat input, improve welding productivity, and minimize the dependency on power sources in the air environment. In this article, the influence of Al/Fe2O3 thermite on electrical dependency, microstructural characteristics, and mechanical performance during the underwater wet welding of Q235 steel was investigated. The results revealed that adding exothermic flux enhanced the underwater wet welding appearance. The basicity of the slag steadily decreased from 1.77 to 0.73 because of the formation of Al2O3. Thermite increased the quantity and diameter of inclusions in the underwater wet weld metal. The excessive addition of Al/Fe2O3 thermite resulted in agglomerated inclusions in the weld metal. Significant microstructural changes from grain boundary ferrite to acicular ferrite were mainly caused by the de-oxidation products of the thermite process. When thermite was added to the flux-cored wire, the ultimate tensile strength first increased and then decreased, while the microhardness of the underwater wet welds showed an obviously increasing trend. The addition of exothermic flux additions to the flux-cored wire can help generate chemical heat and increase the energy required to melt the wire. This study established a link between thermite addition and joint performance, paving the way for the development and application of thermite-assisted self-shielded flux-cored wire.
更多
查看译文
关键词
underwater wet welding,FCAW,mild steel,thermite,welding quality
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要