Determining the height of Mount Everest using the shallow layer method

<p>We proposed an alternative method to determine the height of Mount Everest (HME) based on the shallow layer method (SLM), which was put forward by Shen (2006). We use the precise external global Earth gravity field model (i.e., EGM2008 and EIGEN-6C4 models) as input information, and the digital topographic model (i.e., DTM2006.0) and crust models (i.e., CRUST2.0 and CRUST1.0 models) to construct the shallow layer model. There are four combined strategies&#65306;(1) EGM2008 and CRUST1.0 models, (2) EGM2008 and CRUST2.0 models, (3) EIGEN-6C4 and CRUST1.0 models, and (4) EIGEN-6C4 and CRUST2.0 models, respectively. We calculate the HME by two approaches: first approach, the HME is directly calculated by combining the geoid undulation (N) and geodetic height (h); second approach, we calculate the HME by the segment summation approach (SSA) using the gravity field inside the shallow layer determined by the SLM. Numerical results show that for four combined strategies, the differences between our results and the authoritatively released value 8848.86 m by the Chinese and Nepalese governments on December 8, 2020 are 0.448 m, -0.009 m, -0.295 m, and -0.741 m using first approach and 0.539 m, 0.083 m, -0.214 m, and -0.647 m using second approach. The combined calculation of the HME by the terrain model and gravity field model is more accurate than that by the gravity field model alone. This study is supported by the National Natural Science Foundations of China (NSFC) under Grants 42030105, 41721003, 41804012, 41631072, 41874023, Space Station Project (2020)228.</p>