Volume scan modeling simulator of a 1D phased array weather radar

Phased array weather radar (PAWR) for hazardous weather phenomena observation has attracted considerable attention. In this paper, a PAWR simulator for volume scan mode modeling is designed and the volume scan model has been used to evaluate the one-dimensional (1D) PAWR beam pattern characteristics and the effect of scanning mode. Firstly, the three-dimensional weather field has been generated by interpolating spectral moment parameters from next-generation weather radar data (NEXRAD), including reflectivity factor, radial velocity and spectral width. Secondly, based on the parameters of radar system and volume scanning modeling, the relationship between phased array beam characteristics and volume scanning mode is established, which can fully simulate the scanning process of phased array radar at different elevation cuts. Finally, according to the concept of 'scattering center', the time series of each range bin during volume scanning is reconstructed. The performance of the PAWR simulator has been evaluated under typical weather scenario, such as tornadoes and the results indicated the effectiveness and superiority over traditional Doppler weather radar. Simulation examples are provided to illustrate the flexibility and practicability of the PAWR simulator, and the factors affecting its PAWR detection performance are evaluated. The research results represent that reducing the number of linear array elements and increasing the array angle will further exacerbate the degradation of data quality.