Enhanced Hydroxyl Radical Generation for Micropollutant Degradation in the In2O3/Vis-LED Process Through the Addition of Periodate.

Periodate (PI) as an oxidant has been extensively studied for organic foulants removal in advanced oxidation processes. Here PI was introduced into In2O3/Vis-LED process to enhance the formation of center dot OH for promoting the degradation of organic foulants. Results showed that the addition of PI would significantly promote the removal of sulfamethoxazole (SMX) in the In2O3/Vis-LED process (from 9.26% to 100%), and center dot OH was proved to be the dominant species in the system. Besides, the process exhibited non-selectivity in the removal of different organic foulants. Comparatively, various oxidants (e.g., peroxymonosulfate, peroxydisulfate, and hydrogen peroxide) did not markedly promote the removal of SMX in the In2O3/Vis-LED process. Electrochemical analyses demonstrated that PI could effectively receive photoelectrons, thus inhibiting the recombination of photogenerated electron-hole (e(-)/h(+)) pairs. The holes then oxidized the adsorbed H2O to generate center dot OH, and the PI converted to iodate at the same time. Additionally, the removal rate of SMX reduced from 100% to 17.2% as Vis-LED wavelengths increased from 440 to 560 nm, because of the low energy of photons produced at longer wavelengths. Notably, the species of PI do not affect its ability to accept electrons, resulting in the degradation efficiency of SMX irrespective of pH (4.0-10.0). The coexistence of inorganic cations and anions (such as Cl-, CO32-/HCO3-, SO42-, Ca2+, and Mg2+) also had an insignificant effect on SMX degradation. Furthermore, the process also showed excellent degradation potential in real water. The proposed strategy provides a new insight for visible light-catalyzed activation of PI and guidance to explore green catalytic processes for high-efficiency removal of various organic foulants.