Investigation of Cr(VI) sorption from aqueous solution on M-TACA magnetic nano-sorbent

In this study, a magnetic nano-sorbent (M-TACA) was linked with an N -methyl- d -glucamine (NMDG) picky functional group using click chemistry, which is rapid, multifunctional, easy to use, and produces a large amount of product that is selective to the target site. M-TACA were detected using scanning electron microscopy (SEM) and vibrating-sample magnetometry (VSM) techniques. The effects of pH, contact time, initial Cr(VI) ion concentration, and M-TACA dosage on the sorption process were examined. The sorption capacity of Cr(VI) ions to M-TACA nanoparticles differs depending on pH. The maximum sorption capacity of Cr(VI) ions to M-TACA nanoparticles was determined to be 117.65 mg/g at pH 3. The effects of cationic ions Cu 2+ , Zn 2+ , and Ni 2+ and anionic ions Cl − , PO 4 3− , and SO 4 2− on the removal of Cr(VI) were also investigated. Sorption is more compatible with the Langmuir isotherm model than any other applied isotherm model. The Langmuir isotherm model for sorption was shown to be more compatible than the other models among the isotherm model research. Intra-particle diffusion model was applied for the Cr(VI) ions sorption mechanism. Both surface and intra-particle sorption are clearly different from one another in the two sorption stages. According to the M-TACA-Cr(VI) sorption systems computed thermodynamic characteristics, the process was exothermic, spontaneous, and mixed physicochemical in nature. Moreover, in reusability studies, M-TACA nano-sorbent was found to retain 96.8% sorption capacity after five consecutive repetitions.