Optimization of preparation of NaA zeolite from fly ash for CO 2 capture

The green synthesis method of fly ash-based NaA zeolite was explored to reduce the synthesis cost and environmental hazards. For the prepared NaA samples, the effects of crystallization time, solid-liquid ratio, and Si/Al ratio were systematically studied. CO 2 adsorption isotherm is used for adsorption model fitting analysis and adsorption selectivity determination. According to the experimental results, the optimized NaA zeolite synthesis conditions are as follows: the Si/Al ratio of NaA zeolite is 1.4, the solid-liquid ratio is 10, and the crystallization time is 6 h. The green synthesis method reported in this study can successfully prepare NaA zeolite and exhibit excellent CO 2 adsorption performance, reaching 4.34 mmol/g, with high CO 2 selective adsorption ability, reaching 89.2 for N 2 , 257.1 for O 2 , and 45.8 for CH 4 . The adsorbed CO 2 can be released for further utilization, and NaA zeolite also has strong adsorption and regeneration performance, with a ten cycle adsorption capacity only decreasing by 1.17%. In addition, the use of cheap raw materials synthesis methods will promote the large-scale industry application of green synthesis technology in the future.