Study on pre-concentration of trace heavy metal ions in water quality detection using FO-electroosmotic integrated chip

The focus of this study is on the enhanced concentration effect of the pump effect in forward osmosis (FO) and electroosmotic integrated chip. The study investigates the strengthening effect of the FO process, driven by the pump effect, on the electroosmotic flow process under the same energy consumption, using low-concentration heavy metal ions (Cr3+) as the target enrichment. In the chip system, the pump effect, caused by capillary pressure difference, successfully replaces the osmotic pressure of the draw solution as a new driving force for the FO process. By adjusting the size and number of channels and avoiding errors, the study achieves the highest efficiency of the FO process in the chip, concentrating Cr3+ from 1.26 x 10-4 mol/L to 8.01 x 10-4 mol/L (6.4 times) within 32 min. Excluding the influence of the electrokinetic (EK) limit of low-concentration samples, the concentration efficiency of an individual electroosmotic chip in this study is positively correlated with crossnanochannel voltage (Vcn). The integrated FO and electroosmosis chip reduce the duration required to concentrate 50 mL Cr3+ sample to the limit from 90 min to 16 min (5.6 times) compared to the single electroosmotic process. Furthermore, a series of Cr3+ samples with concentrations below the detection limit of the UV-vis spectrophotometer were concentrated and detected by the integrated chip. The results indicate that the concentration limit of the FO-electroosmotic integrated chip for samples can increase the detection limit of Cr3+ from 1.37 x 10-4 mol/L to 3.67 x 10-6 mol/L.