Prioritization and deployment of design for additive manufacturing strategies to an automotive component

PurposeThis paper aims to propose a new framework on prioritizing and deployment of design for additive manufacturing (DfAM) strategies to an industrial component using Fuzzy TOPSIS multiple criteria decision-making (MCDM) techniques. The proposed framework is then applied to an automotive component, and the results are discussed and compared with existing design. Design/methodology/approachEight DfAM design alternatives associated with eight design criteria have been identified for framing new DfAM strategies. The prioritization order of the design alternatives is identified by Fuzzy TOPSIS MCDM technique through its closeness coefficient. Based on Fuzzy TOPSIS MCDM output, each of the design alternatives is applied sequentially to an automobile component as a case study. Redesign is carried out at each stage of DfAM implementation without affecting the functionality. FindingsOn successful implementation of proposed framework to an automotive component, the mass is reduced by 43.84%, from 0.429 kg to 0.241 kg. The redesign is validated by finite element analysis, where von Mises stress is less than the yield stress of the material. Practical implicationsThe proposed DfAM framework and strategies will be useful to designers, R & D engineers, industrial practitioners, experts and consultants for implementing DfAM strategies on any industrial component without impacting its functionality. Originality/valueTo the best of the authors' knowledge, the idea of prioritization and implementation of DfAM strategies to an automotive component is the original contribution.