Laser-induced heating, property changes, and damage modes in carbon fiber reinforced polymer matrix woven composites

Despite numerous efforts to understand mechanical damage in carbon fiber reinforced polymer matrix composites, there are minimal experimental and computational efforts that incorporate temperature effects on mechanical performance of composites. Recent studies have shown temperature changes can be readily monitored and predicted under relatively low heat fluxes. The present study augments such prior work by exploring effects of higher heat fluxes and increased heating rates. Plain-woven composites with T650 carbon fibers in a bismaleimide 5250-4 matrix were heated with a continuous wave laser (3.0 cm diameter flat-top beam profile at 1.0692 μm). Laser powers and durations were designed to reach temperatures near, and exceeding, matrix decomposition temperatures. Three duplicates of specimens were irradiated with four powers and two durations, yielding an irradiance range of 4.2 – 12.7 W/cm2. Resulting spatial and temporal temperature changes were measured with calibrated infrared cameras for both composite surfaces. Post-test surface photography and X‐ray CT scans were used to assess morphology changes and damage characteristics. Two key findings are reported herein: (i) delamination events dramatically impacted thermal transport, and (ii) TGA data and appropriate kinetic models can be used to account for temperature- / rate- dependent thermal responses and damage behaviors in the composites.