Sulfate radical-based advanced oxidation process effects on tire wear particles aging and ecotoxicity

Tire wear particles (TWPs) are widely distributed in natural water and pose as major pollutants in aquatic environments. In this study, heat-activated persulfate (HPT) and ultraviolet-activated persulfate treatments (UPT) were employed to investigate the influence of sulfate radical (SO4 - center dot)-based advanced oxidation process (SAOPs) on TWP physicochemical properties and to clarify their ecotoxic effects in laboratory-level studies. Results showed that the specific surface areas of TWPs increased after UPT but decreased after HPT. In terms of chemical properties, the increase of oxygen-containing functional groups on the surfaces of TWPs was more evident in UPT than that in HPT. The atrazine (ATZ) adsorption capacity of TWPs after HPT and UPT was increased compared with the untreated TWPs. Atrazine adsorbed by TWPs was easily resolved and released in artificial intestinal fluid (1.89-2.08 mg/g) and artificial gastric fluid (1.60-2.04 mg/g) conditions. Acute toxicity experiments of Photobacterium phosphoreum and SEM-EDS detection results suggested that various heavy metals (e.g., Zn2+, Cu2+) in the TWPs would be released into the water system in SAOPs. ATZ released from TWPs that adsorbed ATZ herbicide, rather than TWPs themselves, had a negative effect on aquatic plant growth (e.g., C. vulgaris). The leaching solution of oxidized TWPs (after HPT and UPT) showed a more significant inhibition effect on the zebrafish survival compared with that of untreated TWPs, which was possibly caused by the generation of oxidation byproducts such as N-(1,3-dimethylbutyl)-N '-phenyl-p-phenylenediamine-quinone.