An Automatic Apparatus for Simultaneous Measurement of Seebeck Coefficient and Electrical Resistivity

A fully automated experimental system was designed for simultaneous measurement of the Seebeck coefficient and electrical resistivity of thermoelectric materials in bulk form. The system incorporates a straightforward and easily fabricated sample holder along with commercially available electronic instrument components. The sample holder showcases a compact design that utilizes two Peltier module heaters to induce sample heating and generate the required temperature gradient. System automation and control are achieved through the implementation of a LabView program. The Seebeck voltage and resistance of the sample (under specified temperature conditions) are determined using I-V measurements. The Seebeck voltage and resistance of the sample correspond to the intercept and slope of the I-V characteristic diagram in the four-point probe method, respectively. To verify the accuracy and reliability of the developed apparatus, a variety of experiments were performed on N-type and P-type bismuth telluride samples. The measurement results closely matched those obtained from commercial systems, with an overall data difference of less than 10% for both the Seebeck coefficient and resistivity measurements.