A high-performance long-range surface plasmon resonance sensor based on the co-modification of carbon nanotubes and gold nanorods

In order to solve the problem that the sensitivity of the optical fiber surface plasmon resonance (SPR) sensor is limited and the full width at half maxima (FWHM) is greatly increased after modification of two-dimensional materials such as carbon nanotubes (CNTs), this paper proposes a Long-Range Surface Plasmon Resonance (LRSPR) Sensors co-modified by CNTs and gold nanorods. Gold nanorods were used to further enhance the sensitivity, and a simple and convenient method was used to excite the LRSPR by using low refractive index UV glue as a dielectric matching layer (DML). Compared with SPR sensor, the FWHM is reduced. The LRSPR sensor produced in this paper has a sensitivity of 5056.35 nm/RIU and a figure of merit (FOM) of 23.52 RIU-1, which are 150.64% and 24.38% higher than conventional SPR sensors, providing a method to achieve high sensitivity and FOM of the sensor. At the same time, the large specific surface area of CNTs and gold nanorods can also improve the biocompatibility of the sensor surface, which makes it have the potential of biosensing. In this paper, the use of UV glue as a DML to excite LRSPR is proposed for the first time.