Construction and testing of a low-cost device for the collection of rainfall samples destined for stable isotope analysis

Oxygen-and hydrogen-isotope ratios in rainfall provide important hydroclimatic information, yet despite a global network of rainfall isotope measurements, significant geographical gaps exist in data coverage, with only three long-term stations spanning the southern African region. Project-based, ad hoc collections of rainfall for isotope analysis can improve this coverage. However, all rainfall samples that are destined for stable isotope analysis must be collected in such a way to avoid evaporation and resultant isotope fractionation. While such rainwater collectors are available commercially, both the product and shipping are prohibitively costly. We describe the construction of a simple rainfall collector using a design from the literature and materials that are readily available in South African hardware stores. Our rainwater collector can be constructed for the much lower cost of just under ZAR820 in comparison with the cost of ZAR9300 inclusive of shipping from commercial outlets (2022 prices). Our design modifications have the added advantage of portability, with the rainwater collector housed in a bucket with a handle. The device was tested by comparing its performance, in terms of evaporative water loss and isotopic fractionation, with that of an open bottle, using tap water in both cases. Testing confirmed that the collector prevented evaporation over a one-week period, indicating that it is suitable for weekly or more frequent sampling of rainfall. Although the design described was based on materials procured in South Africa, it could easily be adapted for construction elsewhere.