New strategies to improve the sensitivity of the ANAIS-112 experiment at the Canfranc Underground Laboratory

The goal of the ANAIS-112 experiment, which operates at LSC, is to test in a model independent way the DAMA/LIBRA positive signal using the same target (NaI(Tl) crystals) and technique. Several strategies have been followed in this work to improve the sensitivity of the ANAIS-112 experiment. The Quenching Factor (QF) is a key factor in the comparison between different experiments. It has been determined both for iodine and sodium nuclear recoils in 5 crystals, for the first time in the same setup and using the same analysis protocol. Compatible values have been obtained for all of them. The calibration method in electron equivalent energy has proved to be critical in the QF estimation and allows understanding the discrepancies between previous measurements, but not concluding if the sodium QF is constant with energy or it increases up to about 80 keVnr. Therefore, further work is required to understand the conversion of the energy deposited in NaI(Tl) into light by different particles, as it is essential to develop a model for the QF. As a first step in an effort to understand the origin of some of the spurious event populations observed in the experiment, a GEANT4 simulation of an ANAIS-112 module has been developed including optical light emission and propagation after an energy deposit. Finally, the possibility of improving the sensitivity of NaI scintillators by replacing Photomultiplier Tubes with Silicon Photomultipliers as light sensors has been studied. These detectors offer very interesting opportunities within the new project ANAIS+. In this work we have characterized SiPMs from different manufacturers, established measurement protocols for the most relevant parameters, studied the properties of NaI and NaI(Tl) crystals at different temperatures and designed NaI+SiPM prototypes that will allow us to evaluate the limitations and opportunities of this new technology.