Signal detection and material identification method for loose particles inside sealed relays based on fusion classification model

In this study, the authors combined the research on loose particle signal and component signal identification with the research on loose particle material identification for the first time, providing comprehensive and reliable loose particle detection results. Based on this, a signal detection and material identification method for loose particles inside sealed relays based on fusion classification model is proposed. Due to the limitations of technical means and confidentiality management, the authors made a real sealed relay sample, and took it as the research object. Through the steps of data acquisition, signal processing, feature engineering, and model training, the dedicated component identification feature library and material identification feature library was constructed, respectively, the component identification model and material identification model based on parameteroptimized SVM with linear kernel and XGBoost was trained, respectively. For the seal relay to be tested, through the steps of data acquisition, signal processing and feature engineering, the data set to be tested was created. The component identification model was used to identify component signals with loose particle signals, and the material identification model was used to identify the materials of loose particles. The majority voting process was used to convert the classification results into identification results, resulting in loose particle detection and material identification results. In addition, the general procedure steps of the proposed method for physical testing were given, and the identification accuracy for device-level loose particle detection was newly proposed. The loose particle testing event containing thirty-seven identification tasks shows that, the achieved identification accuracy was 97.30%, and 92.16% of the average classification accuracy was achieved by the component identification model, 80.41% of the average classification accuracy was achieved by the material identification model. This effectively demonstrates the feasibility and practicality of the proposed method in this paper. It is an important supplement to the loose particle detection research, and provides references for signal detection in similar fields.