Heterointerface Design of Perovskite Single Crystals for High-Performance X-Ray Imaging

Metal halide perovskite single crystals (MHP-SCs) are known for their facile fabrication into large sizes using inexpensive solution methods. Owing to their combination of large mobility-lifetime products and strong X-ray absorption, they are considered promising materials for efficient X-ray detection. However, they suffer from large dark currents and severe ion migration, which limit their sensitivity and stability in critical X-ray detection applications. Herein, a heterointerface design is proposed to reduce both the dark current and ion migration by forming a heterojunction. In addition, the carrier transport performance is significantly improved using heterointerface engineering by designing a gradient band structure in the SCs. The SC heterojunction detectors exhibit a high sensitivity of 3.98 x 105 mu C Gyair-1 cm-2 with a low detection limit of 12.2 nGyair s-1 and a high spatial resolution of 10.2 lp mm-1 during imaging. These values are among the highest reported for state-of-the-art MHP X-ray detectors. Moreover, the detectors show excellent stability under continuous X-ray irradiation and maintainclear X-ray imaging after 240 d. This study provides novel insights into the design and fabrication of X-ray detectors with high detection efficiency and stability, which are beneficial for developing inexpensive, high-resolution X-ray imaging equipment. A solution epitaxial growth strategy is proposed to grow high-quality perovskite single crystal heterojunction with designable heterointerface width. The single crystals possess low dark current and ion migration due to their high energy-band barrier at the space charge region. Therefore, X-ray detectors fabricated on the single crystals exhibit stable, high sensitivity, low detection limit, and high spatial resolution during X-ray imaging.image